Network Setup - Nuvico EVLite EVL-400 Instruction Manual

5. NETWORK SETUP

SETUP NETWOK
The network menu allows for adjustment to TCP/IP settings for viewing video across a local area
network or the Internet.
CONFIG
If the DVR is connected to a static IP network line, set the CONFIG to STATIC IP. However, if the
DVR is connected to a DHCP server (router) or dynamic IP service internet modem (cable modem),
set the CONFIG to DHCP.
IP ADDRESS, NETMASK, & GATEWAY
Input the appropriate IP ADDRESS, NETMASK, & Default GATEWAY value.
PORT
Input the port number for the network connection, the default value is "7000".
Note: If you are using a dynamic IP internet service, hostname can be used to connect to the
DVR. Hostname can be found under the "INFO" tab in the "SYSTEM" menu.
i.e., INTERNET EXPLORER: http:// hostname.dvrhost.com:port#
NUVICO CMS Lite S/W: hostname.dvrhost.com
- 18 -