Pan / Tilt / Zoom Control - Nuvico AP-D1600 Manual

C. PAN / TILT / ZOOM CONTROL
The APEX DVR supports a variety of PTZ cameras. Please read the PTZ manufacturer's instruction
manual and confirm their settings fully prior to proceeding to any attempts to connect and control the PTZ
camera through the APEX DVR. Please refer to PTZ PORT and PTZ ID in the DEVICE menu under
CAMERA. Additionally, refer to Protocol setting in the DEVICE menu under COM PORT. Press the
appropriate channel number then press PTZ button to control the PTZ camera. Controlling PTZ function
is also supported from the remote controller.
Press PTZ button to initiate PTZ function. The PTZ icon will
appear on the status bar. Thereafter, use the navigation buttons,
as well as Tele and Wide buttons, to control the PTZ camera. In
case using NUVICO protocol, the PTZ camera menu can be
accessed by pressing MENU button.
30
APEX SERIES DVR