Product Specifications; General Safety Rules; Work Area - Drill Master 95578 Assembly And Operating Instructions Manual

Item
Electrical
Requirements
Spindle Size
Required
Grinding Wheel Size
(Not Included)
Side Handle
Dimensions
Overall
Dimensions
Net Weight
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and as-
sembly diagram. Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep this manual and invoice in a safe and dry
place for future reference.
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
Children should not be allowed in the work area.
SKU 95578 For technical questions, please call 1-800-444-3353

PRODUCT SPECIFICATIONS

Description
120 VAC / 60 Hz / 4.2 Amps / 11,000 RPM
Power Cord Type: 18 AWG x 2C / 6' Long
Power Plug Type: 2-Prong / Polarized
Power Switch Type: Toggle (ON/OFF)
5/8"-11 TPI with 7/8" Arbor Adapter
4-1/2" Diameter
1/4" Thick
7/8" Spindle Hole
4-1/2" Long x 2-1/4" O.D.
10-1/8" Long x 8" Wide x 3-3/4" High
(with Side Handle)
3.5 Pounds
SAVE THIS MANUAL

GENERAL SAFETY RULES

WARNING!
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS

WORK AREA

PAGE 2