Digitus RedRapid X User Manual page 96

Parameter
Outgoing Default
Action
Incoming Default
Action
Direction
Rule Action
Source MAC Address The source MAC address. It must be 12-digit
Destination MAC
Address
Current Filter Table
When you finish, click 'Apply Changes'. You'll see the following message
displayed on web browser:
Description
Specify the default action on the LAN to WAN (Traffic to
Internet) forwarding path. You can choose 'Allow' if you
allow the IP Addresses listed in the following table from
connecting to the Internet; choose 'Deny' if you deny the
IP Addressed listed in the following table from connecting
to the Internet.
Specify the default action on the WAN to LAN (Traffic
from Internet) forwarding path.
You can choose 'Allow' if you allow the IP Addresses
listed in the following table from connecting to the
Internet; choose 'Deny' if you deny the IP Addressed
listed in the following table from connecting to the
Internet.
Traffic bridging/forwarding direction: outgoing or
incoming.
Deny or allow traffic when matching this rule.
hexadecimal format, for example: "00-d0-59-c6-12-43".
The destination MAC address. It must be 12-digit
hexadecimal format, for example: "00-d0-59-c6-12-50".
If you want to remove some filter rules from the "Current
Filter Table", select the MAC Address you want to
remove in the table and then click "Delete Selected". If
you want remove all settings from the table, just click
"Delete All" button.
87
deny and allow