Table of Contents
Advertisement
System Description
System Contact
System Name
System Location
System Object ID
Trap IP Address
Community name
(read-only)
Community name
(write-only)
When you finish, click 'Apply Changes'. You'll see the following message
displayed on web browser:
Press 'Continue' to save the settings made and back to web management
interface; press 'Apply' to save the settings made and restart the router so the
settings will take effect after it reboots.
Enter the system description of the router.
Enter the contact person and/or contact information for
the router.
Assign an administratively name for the router.
The physical location of the router.
It is the vendor object identifier. The vendor's
authoritative identification of the network management
subsystem contained in the entity.
Destination IP address of the SNMP trap.
Name of the read-only community. This read-only
community allows read operation to all objects in the
MIB.
Name of the write-only community. This write-only
community allows write operation to the objects defines
as read-writable in the MIB.
35
Advertisement
Table of Contents
