Digitus RedRapid X User Manual page 89

belong to the default group, and the other four groups are all empty. It is possible
to assign any interface to any group but only one group.
Parameter
Disabled/ Enabled
Interface groups
Description
Click the radio button to enable or disable the feature. If
disabled, all interfaces belong to the default group.
To manipulate a mapping group:
1. Select a group from the table.
2. Select interfaces from the available/grouped interface
list and add it to the grouped/available interface list using
the arrow buttons to manipulate the required mapping of
the ports.
3. Click "Apply Changes" button to save the changes.
80