Digitus RedRapid X User Manual page 101

Subnet Mask
Next Hop
Metric
Interface
Add Route
Show Routes
Static Route Table
When you finish, click 'Apply Changes'. You'll see the following message
displayed on web browser:
used for all destinations for which no other route is
defined (this is the route that creates the default
gateway).
The network mask of the destination subnet. The default
gateway uses a mask of 0.0.0.0.
The IP address of the next hop through which traffic will
flow towards the destination subnet.
Defines the number of hops between network nodes that
data packets travel. The default value is 0, which means
that the subnet is directly one hop away on the local LAN
network.
The WAN interface to which a static routing subnet is to
be applied.
Add a user-defined destination route.
Click this button to view the router's routing table.
Click "Update" to update the selected destination route
on the "Static Route Table". Click "Delete Selected" to
delete a selected destination route on the Static Route
Table.
92