Digitus RedRapid X User Manual page 48

Type
Idle Time (ms)
WAN IP Setting
Type
Local IP Address
Remote IP Address Enter the remote IP Address assigned by your ISP.
Subnet Mask
Unnumbered
Continuous – The connection will be kept always on. If
the connection is interrupted, the router will re-connect
automatically.
Connect on Demand – Only connect when you want to
surf the Internet. "Idle Time" is set to stop the connection
when the network traffic is not sending or receiving after
an idle time.
Manual – After you have selected this option, please go
to Status page. You will see the "Connect" button, click it
and the router will connect to the ISP. If you want to stop
the connection, please click "Disconnect" button.
"Idle Time" is set to stop the connection when the
network traffic is not sending or receiving after an idle
time.
Fixed IP – Set the static IP Address to the router. Please
enter the IP Address your ISP has assigned.
DHCP – To get the IP Address from the ISP directly.
Set the IP Address obtained from your ISP.
Enter the Subnet Mask assigned by your ISP.
The IP Unnumbered configuration allows you to enable
IP processing on a serial interface without assigning it an
explicit IP address. When it is enabled, the router's WAN
IP Address can "borrow" the IP address of another
39