Resetting The Watch; The Initial Settings - Citizen U200 User Manual

Resetting the watch

The watch may not work properly if it is affected by static electricity or shock. In this
case, reset the watch.
Crown
36
U200_EN_final.indd 36-37
Caution
After resetting the watch, all settings are
initialized. (→ page 37)
1.
Pull out the crown to position 1.
All the hands stop moving.
2.
Press buttons A, B and M
simultaneously.
All digital display indications light up.
3.
Push in the crown to position 0.
The watch is reset. The confirmation tone sounds and all digital display
indications are canceled.
• The resetting will be also effective in about 2 minutes without any operation.
After resetting, adjust the time (→ pages 18−23) and calendar (→ page 24).

7 The initial settings

AM12 : 00 : 00 / Daylight saving time : OFF (OF)/
[TME]
Display style : 12-hour clock (12H) / City code : UTC
[CAL] January 1, 2008 / Tuesday / City code : UTC
[AL1][AL2] AM12:00 / Alarm : OFF (OF) / City code : UTC
[CHR]
0 : 00 : 00 : 00
[TMR] 99 minutes
37
08.4.24 3:08:23 PM