Advertisement
Correcting the reference position
1.
Pull the crown out to position 1 .
The second hand indicates the alarm setting ( ON/OFF).
2.
Rotate the crown to make the second hand point the flight
mode setting ( ON/OFF).
• Each time you rotate the crown, the second hand moves as follows:
Alarm setting ( ON/OFF) → ACT →
flight mode setting ( ON/OFF) → (back to the top).
3.
Press and hold the button for 5 seconds.
The hands and indication start to move to the current reference positions
stored in memory.
• Release the button as the second hand start to move.
4.
Pull the crown out to position 2 .
5.
Press and release the button repeatedly to change the hand/
indication to be corrected.
• Each time you press the button, the target changes as follows:
Hour hand/date indication → minute/second hands → (back to the top)
• The hands slightly move when selected to show they become adjustable.
6.
Rotate the crown to adjust the hand/indication.
• Minute/second hands and hour hand/date indication synchronously move
respectively.
• When you rotate the crown quickly a few times, the hand/indication will
move continuously. To stop the rapid movement, rotate the crown in either
direction.
7.
Repeat steps 5 and 6.
8.
Push the crown in to position 0 .
The watch keeps to indicate the reference position.
9.
Press the button to finish the procedure.
• The hands and indication returns normal in 2 minutes without pressing
the button.
Resetting the watch — All Reset
1.
Pull the crown out to position 2 .
The alarm sounds and the second hand points 30-second.
2.
Press and hold the button for 7 seconds or more.
As you release the button, the alarm sounds and all reset is executed.
The setting values after All Reset
0:00:00AM
Time
Calendar
January 1 of leap year, Sunday
Alarm setting
OFF
0:00 AM
Alarm time
Pairing information
Pairing information is not removed.
Connection status
OFF
Record of power
Removed
generation amount
After All Reset
After All Reset, adjust the reference position, set the time and calendar and
execute alarm setting.
W410 Abbreviated instruction
Advertisement
