Citizen U200 Abbreviated Instruction

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual:
Component identification
Hour hand
Button
B
Mode indicator
Second hand
Button
M
• Actual appearance may differ from the illustration.
Changing the mode
This watch features six different modes (functions): [TME] (time), [CAL]
(calendar), [AL1]/[AL2] (alarm), [CHR] (chronograph) and [TMR] (timer).
1.
Press and release the lower left button
The current mode is indicated at the mode indicator.
Setting the time
Setting the time of the analog section
1.
Pull out the crown when the second hand points 0 second.
The second hand stops.
2.
Rotate the crown to set the time.
• Move the hands 4 or 5 minutes forward and move them back to the right
time to set the time more precisely.
3.
Push in the crown in accordance with a reliable time source to
finish the procedure.
The second hand starts moving.
U200 Abbreviated instruction
Minute hand
Button
A
Digital display A
Digital display B
Crown
repeatedly.
M
U200 instruction manual
Setting the time of the digital section
• Press button to cancel setting of the time of the digital section.
M
• The setting is automatically canceled in about 2 minutes without any operation
during the setting.
1.
Press and release the lower left button
change the mode to [TME].
2.
Press and release the upper right button
repeatedly to indicate an area name you want on the digital
B
display B.
• For area names, refer to the table on "Using the world time".
3.
Press and hold the upper left button
blink on the digital display A.
The time becomes adjustable.
• The blinking part is the target to adjust.
4.
Press and release the upper left button
the target to be set.
• Each time you press button
Summer time Second
5.
Press and release the upper right button
• Press button in accordance with a reliable time source when setting the
A
second.
• Pressing and holding button
setting the minute and the hour.
• "A" or "P" is displayed to indicate AM or PM in 12-hour basis indication.
6.
Press and release the upper left button
procedure.
repeatedly to
M
or upper left button
A
until "SMT" starts to
B
repeatedly to change
B
, the target changes as follows:
B
Minute Hour 12/24-hour
basis
to adjust the time.
A
changes indication continuously when
A
to finish the
B
1/3