4-5
2
3
5
Removing the cylinder head and piston
– Remove the lower camshaft bearing bridge
1
– Take the shims out of the spring retainers and mark their mounted
NOTE: you will only need to check the valve clearance after
assembling; if valves or other parts in the valve control or replaced, the
valve clearance will need to be readjusted.
– Remove the screws from the chain guide
3
4
– Pull the timing chain guide
– Loosen the cylinder head crews crosswise and remove together with
positions.
and the cylinder base
.
4
the washers.
, remove the dowels.
1
, the cylinder head
2
out of the timing chain compartment.
5
3