3-3
1
2
1
1
3
4
– Pull the manifold pipe forward and remove from the motorcycle.
– Open the drain plug on the water pump and allow the cooling liquid
to drain into a suitable vessel.
– Loosen the hose clamp
engine.
– Disconnect the spark plug connector
– Unscrew the chain securing guide
and tilt up.
– Unscrew the clutch slave cylinder
side.
NOTE: do not actuate the clutch lever as long as the clutch slave
cylinder is dismounted.
and pull the radiator hoses off of the
1
.
2
on the clutch slave cylinder
3
and let it hang down on the
4