Preparatory Work - KTM 250 SX-F 2006 Repair Manual

1
2

Preparatory work

– Thoroughly clean the outside of the engine and screw onto the
engine work stand 560.12.001.000 with both engine holders
770.29.002.000 and 770.29.003.000.
– Unscrew the shift lever, drain the oil and remove the oil filter cover.
Discard the O-ring in the oil filter cover and the seal ring on the oil
drain plug.
– Use suitable pliers (circlip pliers 510.12.011.000) to pull out the
oil filter and discard.
– Unscrew the spark plug.
– Dismount the ignition cover
– Unscrew the pulse generator
recess and remove the pulse generator.
3
– Remove the plug
rings on the plug and on the oil screen.
.
1
, pull the rubber duct out of the
2
and pull out the oil screen. Discard the seal
3
4-2