Usb/Sd Playback - Adastra RMC120 SERIES User Manual

USB/SD playback

Push a USB pen drive into the USB port (2) and/or an SD card into the SD card input (4)
Press the CD/USB/SD button (36) to ensure that the player is set to play from the required memory device.
Press the PLAY/PAUSE button to play the current track and press again to pause as needed.
Searching and playback of tracks is the same as described above for the CD player
FM tuner
Press the FM select button (33) to switch to the FM tuner function.
Use the Previous or Next buttons (37) to select a stored channel.
Tuning and storing stations
Use the Forward/Reverse seek buttons (28) to manually tune the frequency in steps of 0.05MHz
Alternatively, press and hold the Forward/Reverse seek buttons to auto search for available stations.
Upon finding a station, the auto search will stop, giving the option to store this station.
At this point, pressing the PLAY/PAUSE button (30) will flash a "00" channel number in the display.
Use the Previous/Next buttons (37) to select an appropriate channel memory.
Press PLAY/PAUSE again to confirm and store the station into the selected channel memory.
Auto search can be stopped at any time by pressing the Forward/Reverse seek buttons (28)
MUTE ON/OFF
Pressing the MUTE ON/OFF button (32) will mute the output of the audio player.
Pressing and holding the MUTE ON/OFF button will put the audio player in standby mode.
Press this button again to restore functions from standby mode.
953.141UK User Manual