Related Manuals for Adastra RMS1202
Summary of Contents for Adastra RMS1202
- Page 1 RMS1202 1U DUAL-ZONE MIXER-AMPLIFIER Item ref: 953.154UK User Manual Version 1.0 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
- Page 2 Introduction Thank you for choosing an Adastra RMS1202 dual-zone mixer-amp as part of your sound system. This low impedance or 100V power amplifier has the advantage of selectable global or individual inputs and a paging mic input. Please read this manual to gain the best results from your product and avoid damage through misuse.
- Page 3 Set the BASS and TREBLE Tone controls (1, 2, 4, 5) to the vertical position (zero) Loudspeakers should be connected to the RMS1202 via screw terminals on the 2 removable modular connectors. For standard low impedance speakers (4Ω, 8Ω, 16Ω - i.e. not 100V type), use the bottom row of +/- terminals (16) Connect + and –...
- Page 4 Operation When all signal and speaker connections are made, power up the RMS1202 and gradually increase the LEVEL control (9) of each channel to check the output from both zones. Adjust the levels to the required amount and use the BASS and TREBLE controls (4, 5) to adjust the tone as necessary.