Table of Contents
Advertisement
To customize the Bluetooth number press and hold the Play/Pause button until adastra 0000 is displayed with
one of the characters flashing.
Press Previous or Next buttons to edit the number and Play/Pause to select another character.
Hold Play/Pause to store the ID and exit.
Note: Android devices have the facility to re-name devices within the Bluetooth settings menu.
If a the Bluetooth ID has been re-named on the Android device, editing the Bluetooth ID on the media player
will not affect the name displayed on that Android device.
FM Tuner
The FM tuner function operates in the same way as a standard FM radio and benefits from the connection of
an FM antenna to the rear panel 'F' type connector.
If no channels are tuned in, press the Play/Pause button (4) to begin auto tuning, which scans available
stations and stores them as channels within the FM tuner. Pressing Play/Pause again will abort the auto-
tuning.
To step through pre-set stations, press the Previous or Next buttons.
Holding the Previous track or Next track buttons will adjust the output volume of the player.
USB/SD player
When a USB memory stick is inserted into the USB port (9) or SD card into the SD slot (3), the USB or SD
symbol will show in the display and any compressed audio files will start to play automatically. The last
connected media will take priority.
If playback does not start automatically, press the SOURCE select button (1) and Play/Pause button (4) to
check if the player is set to the correct mode. Try Previous track and Next track buttons (2, 5) if the selected
track is unable to play. Check that the audio files are mp3 type.
Turn up USB/LN5 volume control to hear the output from the speakers and increase to the required level.
There are 3 Repeat modes: RTA (Repeat all tracks), RT1 (Repeat current track) and RND (Random).
Pressing the "REPEAT" button (32) will cycle through these modes as shown in the top right of the display.
Pressing the Previous track button (2) briefly steps backwards through tracks on the memory device. Press
and hold this button to decrease the playback volume.
Pressing the Next track button (5) briefly steps forwards through tracks on the memory device.
Press and hold this button to increase the playback volume.
To pause the current track, press the Play/Pause button (4) and press it again to resume playback.
The display shows the track number when a track is selected and then elapsed time during playback
To avoid loud pops through the speakers, turn down the MASTER control before powering down.
Specifications
Model
Power supply
Output power: RMS
RM60
RM120
110/230Vac, 50/60Hz (IEC) or 24Vdc option (screw terminals)
60Wrms
120Wrms
RM240S
RM360S
240Wrms
360Wrms
RM Series User Manual
Advertisement
Table of Contents
