Related Manuals for Adastra RMS605
Summary of Contents for Adastra RMS605
- Page 1 RMS605 1U 5-ZONE MIXER-AMPLIFIER 5 x 60W Item ref: 953.152UK User Manual Version 1.1 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
- Page 2 Introduction Thank you for choosing an Adastra RMS605 5-zone mixer-amp as part of your sound system. This 5-zone 100V power amplifier has the advantage of selectable global or individual inputs and a paging microphone input. Please read this manual to gain the best results from your product and avoid damage through misuse.
- Page 3 Set the BASS and TREBLE Tone controls (1, 2, 4, 5) to the vertical position (zero) Loudspeakers should be connected to the RMS605 via screw terminals on one of 2 removable modular connectors. If the speaker(s) being connected is not 100V type, use the terminal block marked “4Ω” for this channel (14).
- Page 4 Operation When all signal and speaker connections are made, power up the RMS605 and gradually increase the LEVEL control of each channel to check the output to the 5 zones. Adjust the levels to the required amount and use the BASS and TREBLE controls to adjust the tone as necessary.