Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Adastra 953.213UK
Summary of Contents for Adastra 953.213UK
- Page 1 RM-SERIES Rackmount 100V mixer-amplifiers with Bluetooth ® Item ref: 953.213UK, 953.214UK, 953.215UK, 953.216UK User Manual Version 3.1 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
- Page 2 Introduction Thank you for choosing the Adastra RM-series rackmount 100V amplifier as part of your public address system. This amplifier is designed to offer high quality, dependable service for mobile and installed systems. Please read this manual fully and follow the instructions to achieve the best results with your new purchase and to avoid damage through misuse.
-
Page 3: Front Panel
Front panel USB/SD/FM/BT media player BASS EQ control MIC 1 volume control TREBLE EQ control MIC/LINE 2 volume control MASTER volume control MIC/LINE 3 volume control VU level meter LINE 4 volume control POWER on/off switch LN5/USB volume control Speaker zone selector buttons (RM240S/RM360S only) Rear panel Mains voltage switch LINE 4 input (RCA) -
Page 4: Connection And Setup
Connection and setup Connect the rear IEC inlet (14) to the mains using the supplied mains lead (or an equivalent approved type). Ensure that the correct voltage is indicated on the voltage selector (13) and the mains outlet is switched on. Alternatively, the amplifier can be powered by a 24V battery, such as a lorry or boat battery, by connecting the “+”... -
Page 5: Low Impedance Systems
Speaker switching zones (RM240S and RM360S) The RM240S and RM360S have 4 separate terminals for 100V speakers. Any 100V speakers connected to the terminals labelled 100V or ZONE 1 / ZONE 2 / ZONE 3 / ZONE 4 (+) and COM (-) will be governed by 4 front panel speaker switches (12) (e.g. -
Page 6: Media Player
(ensure that the RM amp is powered on and within reception range) 3. Select “adastra 0000” and the sending device should confirm that it is connected as an audio device. (note that “0000” may be a different number if it has been edited – see below) 4. -
Page 7: Usb/Sd Player
To customize the Bluetooth number press and hold the Play/Pause button until adastra 0000 is displayed with one of the characters flashing. Press Previous or Next buttons to edit the number and Play/Pause to select another character. Hold Play/Pause to store the ID and exit. -
Page 8: Troubleshooting
The goods must be disposed of according to your local council guidelines. Hereby, AVSL Group Ltd. declares that the radio equipment type 953.213UK, 953.214UK, 953.215UK and 953.216UK are in compliance with Directive 2014/53/EU The full text of the EU declaration of conformity for 953.213UK is available at the following internet address:...