Related Manuals for Adastra RM406
Summary of Contents for Adastra RM406
- Page 1 RM406 Rackmount 6-zone Mixer-Amplifier Item ref: 953.160UK User Manual Version 1.1 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
-
Page 2: Safety Symbol And Message Conventions
Introduction Thank you for choosing the Adastra RM406 rackmount 6-zone mixer-amplifier as part of your public address system. This unit is designed to offer high quality, dependable service for mobile and installed systems. Please read this manual to gain the best results from your product and avoid damage through misuse. -
Page 3: Front Panel
Front panel Media player USB port Mic/Line 1 level control Media playback zone assign buttons Mic/Line 2 level control Mic/Line 1 zone assign buttons Mic/Line 3 level control Mic/Line 2 zone assign buttons Auxiliary line input level control Mic/Line 3 zone assign buttons Zone 1 output level control Auxiliary line input zone assign buttons Zone 1 monitor send button... -
Page 4: Connection And Setup
Introduction The RM406 is a versatile and powerful mixer amplifier with 4 input channels which can be assigned in a matrix ® to any of 6 zone outputs. In addition to external signal sources, the RM406 has and integrated Bluetooth receiver, FM tuner and USB/SD audio player for comprehensive audio playback options. - Page 5 Speaker outputs The RM406 has a separate speaker output for each zone, connected via 3 large modular terminal plugs. Each plug can be removed from the rear panel for convenient connection of speaker outputs to 2 zones. Each zone output can be used to power either 100V line speakers or standard low impedance speakers.
-
Page 6: Operation
• Reduce the Mic/Line level to compensate If Zone 1 cannot be heard from the location of the RM406, use the monitoring feature as follows • Turn down the Monitor level control (35) and connect headphones to the Monitor output (34) •... -
Page 7: Usb/Sd Player
USB/SD Player The RM406 audio player has inputs for a USB pen drive or SD card with standard compressed digital audio files on them. Inserting either or both of these will switch the player to read from these sources and the display will show “Music Mode”. -
Page 8: Specifications
Specifications Power supply 1710-2664Vac, 50Hz (IEC) Output power 6 x 40Wrms Audio source USB/SD/FM/BT audio player Inputs 3 x mic/line (XLR/jack), auxiliary 2 x RCA Zone outputs: line 6 x RCA (mono) Zone outputs: speaker 6 x terminal outputs 100V / 8 Ohms / 4 Ohms / Com Phantom power +20V switchable to each XLR Monitor outputs...