Cabling of the System Console to the Console Concentrator
Figure 11. Cabling of the System Console to the Console Concentrator
The graphics display is connected to the node of the ordered ESCALA EPC model
(EPC400/430/440 or EPC1200 / EPC1200A, EPC2400). There is no graphics for an
ESCALA EPC800 model.
Cabling of the System Console with a serial link (2-node EPC)
Figure 12. PWCCF01: Cabling Schema for a 2–node Powercluster
Notes:
1. Cable (CBLG105–1800) will be generated automatically and systematically in
2. Cable adapter (CBL 1912) is provided for each native serial port of any CPU
3. On EPC400, instead of using a 8-port board, you can use the S3 port on node #1
the order.
drawer.
and a serial adapter cable (CBL1912). This may conflict with use of S3 for DAS
management.
Console Cabling Requirements
6-9