Bull Escala EPC400 Connecting Manual page 182
Bull escala epc series rack-mountable servers connecting guide
Hide thumbs
Also See for Escala EPC400:
- Hardware manual (109 pages) ,
- Setting up the system (57 pages)
Table of Contents
Advertisement
Cabling Examples for Non Shared LIbraries
No Y cables are used. An external terminator is used to terminate a SCSI chain. One
external terminator is included in the library in standard. A second external terminator
(90054001-001) should also be provided in a library with two drives. For performance
considerations, it is not recommended to chain the drives in a LBX7000 library.
Cabling for: 1 Node – 1 SCSI Adapters – 1 Attached Library – 1 or 2 Drives
Figure 128.
Cabling for: 1 Node – 2 SCSI Adapters – 1 Attached Library – 2 Drives
each SCSI adapter allows to access a separate DLT7000 drive. Two external terminators
are necessary.
Figure 129.
10-72
EPC Connecting Guide
LIBCF04: 1 Node – 1 SCSI Adapter – 1 Library – 1 or 2 Drives
LIBCF05: 1 Node – 2 SCSI Adapters – 1 Library – 2 Drives
- Quick Links:
- Chapter 2. Epc400 Series
Hide quick links:
Advertisement
Table of Contents
