Appendix D. Cable and Connector Identification Codes
Details in:
• Cable Identification Markings
• Connector Identification Codes
Cable Identification Markings
Each end of any cable connecting two items has a FROM–TO label conforming to a specific
format and object identification rules.
Figure shows the format of a FROM–TO label and an example of labeled cable between a
DAS and a CPU.
FROM–TO Labels:
Figure 139.
Legend for Figure :
Number of already existing racks, in case of add-on on customer site.
Object number(1 char.) : 1–9
Object type (6 char.) according to the Object Identification on page D-2.
Number of the first U (lower) for the Drawer in the Rack or EX for external object
Rack Number from Ordering Document (1 char.) : 1–9 or 0 for external object.
Object position in the Drawer: Slot/Connector (up to 13 char.)
DAS1
FROM : R
–
Cable Identification Codes on Labels.
(2 char.): 0–36
–
Appendix D. – Cabling Identification Codes
CPU1
–
D-1