Table of Contents
Advertisement
Smart Touch Cabin Control Installation & Operations Manual
OPERATION
O
C
PERATOR
ONTROLS AND
H
S
OME
CREEN
Figure 7: Smart Touch Home Screen Icon Functions
1.
Power On/Off Icon - Press and release to toggle between the On and Off Modes.
2.
Up Icon - Press and release to display the set point. Press and release the Up icon as many times as desired to
increase the set point. Set point increases one degree each time the icon is pressed.
3.
Down Icon - Press and release to display the set point. Press and release the Down icon as many times as desired to
decrease the set point.
4.
More Icon - Press and release to change display to Main Screen.
5.
Status Icon - Shows the system status. (OFF, PENDING, ACTIVE, STANDBY, FAULT)
6.
Temperature Indicator Icon - Press and release to select from Set point(s), Inside, Outside, or Service/Water
temperatures
7.
Force Sleep Mode Icon - Press and release to force sleep mode to initiate immediately, if enabled (i.e. Sleep Delay
not equal to OFF)
M
S
AIN
CREEN
Figure 8: Smart Touch Main Screen Icon Functions
1.
Mode Icon Indicator - The Mode icon indicates the current mode active. Press and release to select one of the four
operating modes. Continue to press and release the Mode Icon until the desired operating mode is reached. The mode
icons (Auto, Cool, Heat, or Moisture) light to indicate which mode is selected. It shows 4 different icons depending on
the mode:
•
Auto Mode Icon Indicator - The Auto Mode icon is shown when the system is in Automatic Mode, which switches
to cooling or heating as required to satisfy the temperature set point.
•
Cool Mode Indicator - The Cool Mode icon is shown when the cool-only mode is selected or when the unit is in
an Automatic Mode cooling cycle.
L-3380 ENGLISH
D
ISPLAY
I
F
CON
UNCTIONS
7
6
4
I
F
CON
UNCTIONS
10
1
6
8
2
P
ANEL
5
2
3
1
4
5
7
3
9
OPERATION
7
Advertisement
Table of Contents
