Table of Contents
Advertisement
OPERATION
3.
Sleep Mode Settings The available Sleep Mode Settings to modify are
below. Press the Save icon after completing the desired modification.
a.
Sleep Mode Display Allows the user to select among different options
to show after the Sleep Mode Delay has ended (Standard Logo, Custom
Logo, Custom Text, Blank Screen Backlight Off, Blank Screen Backlight
On)
b.
Sleep Mode Delay Allows the user to select either Off, or 0 to 600
seconds of delay before showing the Sleep Mode Display configured. If
Off is selected, the display will not go into Sleep Mode.
c.
Sleep Mode Text Edit Allows editing of the display text when the screen
is in Sleep Mode. Text is edited using arrow icons for each character. Character choices are as follows:
"ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789&'*@:,°=!-()%.+#?/". The total number of characters that will
fit on the screen is a function of the font size, with an absolute maximum of 25.
d.
Sleep Mode Text Color Allows the text color during the Sleep Mode to
be changed. There are 126 different colors to choose from.
e.
Download Custom Logo This option is normally grayed out unless the
Smart Touch detects that the special programming cable is plugged into
its 8-pin jack (i.e. it is not plugged into a Passport I/O or Unity Circuit
board). There is a PC program called the "SmartTouch Downloader" that
enables selection of a 24-bit bitmap file (BMP) and transmission to the
Smart Touch. Instructions for this PC program are provided separately.
18
Smart Touch Cabin Control Installation & Operations Manual
Figure 29: Smart Touch Display
Figure 30: Smart Touch Sleep
Figure 31: Smart Touch Download
Figure 32: Smart Touch Sleep
Editing Settings Page 1 of 14
Mode Settings Page 1 of 2
Logo Settings
Mode Settings Page 2 of 2
L-3380 ENGLISH
Advertisement
Table of Contents
