Ccd Board And Mic; Removing The Ccd Board And Mic - Toshiba Satellite A500 Service Manual

4.25 CCD Board and MIC

4.25 CCD Board and MIC

Removing the CCD Board and MIC

Remove the FL inverter board according to the following procedures and Figure 4-43.
1. Remove the CCD module with CCD cable from display rear cover.
2. Disconnect the CCD cable from the CCD module connector.
Display rear cover
Figure 4-29 Removing the CCD board and MIC
3. Lift the MIC from the display rear cover.
Satellite/Satellite Pro/A500/A505/A507/dynabook
MIC cable
CCD module
Maintenance Manual
4 Replacement Procedures
CCD cable
4-71