4 Replacement Procedures
4.21 Slot ODD Module
Removing the Slot ODD Module
NOTE: The installation and removal procedures are the same for all the modules that
can be installed in the ODD bay. See the appropriate sections for the disassembly
procedures of specific modules.
Remove the Slot ODD Module according to the following procedures and Figures 4-33.
1. Lift up the slot ODD back then take it follow arrow direction.
CAUTION: Handle the ODD bay module carefully it can become hot during operation.
Figure 4-33 Removing the Slot ODD module
Installing the Slot ODD Module
Install the Slot ODD module according to the following procedures and Figures 4-33.
1. Place the Slot ODD module in the correct position.
4-56
Manual
Slot ODD
Satellite/Satellite Pro/A500/A505/A507/dynabook
4.21 Slot ODD Module
Maintenance