4.14 AC-IN cable, RJ11(or FM) cable and USB cable
Installing DC-IN cable, RJ11(or FM) cable and USB cable
Install the DC-IN cable, RJ11(or FM) cable and USB cable to the following procedures
and Figure 4-19.
1. Seat the DC-IN cable in the correct position.
2. Connect the DC-IN cable to CN6000 on the system board.
3. Seat the RJ11(or FM) cable in the correct position.
4. Seat the two connectors USB cable in the correct position.
5. Secure the two connectors USB cable with one M2.5x10 black flat head screw.
6. Connect the two connectors USB cable to CN18 on the system board.
7. Seat the one connector USB cable in the correct position.
8. Secure the one connector USB cable with two M2.5x4 black flat head screws.
9. Connect the one connector USB cable to CN814 on the system board.
Satellite/Satellite Pro/A500/A505/A507/dynabook
4 Replacement Procedures
Maintenance Manual
4-39