For the latest technical updates or manual corrections, visit the Heli-Max web site at: www.helimax-rc.com Open the “Helicopters” link, and then select the MD-530. If there is new technical information or changes to this model a “tech notice” box will appear in the upper left corner of the page.
In that Heli-Max has no control over the fi nal assembly or material used for fi nal assembly, no liability shall be assumed nor accepted for any damage resulting from the use by the user of the fi...
KIT INSPECTION KIT INSPECTION Before starting assembly, take an inventory of the MD-530 kit. If any parts are missing, damaged, or defective, contact Product Support. When reporting defective or missing parts, use the part names exactly as they are written in the Kit Contents list.
® Your new MD-530 uses SLT protocol. This means that with the simple addition of the Tactic Anylink ™ , you can enjoy your new machine with nearly “any” transmitter. AnyLink Tx Compatibility Chart (Check Tx-ready.com for updates) Required Cable...
® BATTERY PRECAUTIONS BATTERY PRECAUTIONS This MD-530 uses a lithium polymer (LiPo) battery. Follow these precautions to insure safe and trouble free operation. ● Only use the included charger with the included battery. ● Do not attempt to use this charger with NiCd or NiMH battery packs.
® CHARGING THE FLIGHT BATTERY CHARGING THE FLIGHT BATTERY WARNING!! The charger supplied with the Heli-Max MD-530 Helicopter contains protective circuitry. If you experience any diffi culties while charging the battery, please disconnect the battery from the charger and unplug the charger from the power source. Allow the battery and charger to rest for two hours as this will allow the charge protection circuit to reset.
® INSTALL THE TRANSMITTER BATTERIES INSTALL THE TRANSMITTER BATTERIES ❏ Carefully remove the battery door and install four AA batteries. Double check the polarity of each battery. Slide the battery cover back into place. ® TRANSMITTER CONTROLS TRANSMITTER CONTROLS All controls are described with the tail pointing directly toward you. This is the best way to fl...
Page 9
The dual rate switch provides dual control rates for the cyclic and tail rotor controls. Please use the low rate until you become accustomed to your MD- 530. Change the dual rate using a quick push of the right stick. To adjust the dual rate, push and “hold”...
Moving the throttle stick up or down will cause the helicopter to climb or descend. Helicopter Climbs or Descends Helicopter Climbs or Descends Helicopter Climbs or Descends Moving the tail rotor stick left or right will cause the helicopter nose to rotate in that Nose Rotates Left or Right Nose Rotates Left or Right Nose Rotates Left or Right...
FLYING FLYING The Heli-Max MD-530 is a lightweight helicopter. Taking that into consideration, you should only fl y indoors or in calm winds less than 5mph. It should be fl own in a large area of at least 75 feet [15.25m] square with no obstacles.
® ORDERING PARTS ORDERING PARTS Replacement parts for the Heli-Max MD-530 are available using the order numbers in the Replacement Parts List that follows. The fastest, most economical service can be provided by your hobby dealer. To locate a hobby dealer, visit the Heli-Max web site at www.helimax-rc.com.
® ® sales tax. If ordering via fax, include a Visa or MasterCard number and expiration date for payment. Mail parts orders Hobby Services and payments by 3002 N. Apollo Drive, Suite 1 personal check to: Champaign, IL 61822 Be certain to specify the order number exactly as listed in the Replacement Parts List.
Need help?
Do you have a question about the MD530 2.4GHz RTF/Tx-R and is the answer not in the manual?
Questions and answers