Affixing The Paper Size Label - Olivetti d-Color MF360 Installation Manual

XXII. Affixing the paper size label
Affix the paper size label.
Paper size label
For loading the paper as well as setting the paper
type, refer to the user's guide.
XXIII. Affixing the label (Legal restrictions
on copying)
Affix the label (Legal restrictions on copying) to the
position shown below.
Note:
This step may not be performed depending on the
applicable marketing area.
Label
Y111050-6
XXIV. Adjusting registration of paper
source options
<1 way paper feed cabinet, large capacity cabinet>
1. Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
2. Select the function to be used as follows:
Machine → Printer Area → Centering → 3rd.
3. Press the start key.
A test print will be produced.
4. Measure width A from the edge of the paper to
the pattern printed on the test print and check that
it falls within the specified range.
Specifications: 3.0 mm ± 1.0 mm
A0EDIXC031DA
5. If the measured width A falls outside the specified
range, enter the correction value using the
or
6. Produce another test print and check to see if
width A falls within the specified range.
7. Select the function to be used as follows:
Centering (Duplex 2nd Side) → 3rd.
8. Press the start key.
A test print will be produced.
9. Measure width A of the test pattern on the back-
side of the test print produced and check that it
falls within the specified range.
A0EDIXE040DA
Specifications: 3.0 mm ± 2.0 mm
Paper exit
direction
E-13
Paper exit
direction
A
key.
A
4061IXC147DA
4061IXC152DA
Installation Manual