Olivetti d-Color MF360 Installation Manual page 4

2. Open the right door and remove the protective
sheet and packaging materials.
Note:
After removing the packaging materials, make
sure that the transfer roller assy is secured in
place. In the case of <NG>, press the transfer
roller assy into place so that it is secured as shown
in <OK>.
< OK >
3. Remove the packing bracket.
Installation Manual
4. Install the furnished control panel.
Note:
< NG >
5. Secure the control panel with a furnished screw.
A0EDIXC006DB
6. Connect the machine connector to the control
A0EDIXC007DA
E-4
Insert the hook of the control panel into the posi-
tioning hole of the machine.
panel.
A0EDIXC008DA
A0EDIXC009DA
A0EDIXC010DA
Y111050-6