The Atlona HDMI to HDMI Scaler with Audio is a simple solution to resolution incompatibilities. The AT-HD560 is easy to use with an on-screen menu for scaling and image correction. Scaling is available from 640x480 up to 1920x1200 or 480i up to 1080p.
2. Toslink output port: Connect digital audio (over fiber optic cable) to an audio receiver DC 5V 3. 3.5mm audio output port: Connect analog audio to analog equipment AT-HD560 OUTPUT 4. Menu button: Press to activate on-screen menu and to confirm selections...
15 minutes before the output signal is shut off - EXIT Back to Menu FACTORY RESET INFO INFORMATION SOURCE (Input Type) INPUT (Resolution) OUTPUT (Resolution) VERSION (Firmware #) MIRR EXIT Close the OSD Menu EXIT Toll free: 1-877-536-3976 atlona.com Local: 1-408-962-0515...
3. While holding the menu button, plug the power cord back in. Hold the Menu button for an extra 5 seconds. 4. Release the menu button. It may take up to 10 seconds for the AT-HD560 to connect with the display. Toll free: 1-877-536-3976 atlona.com...
It may also cause damage to your AT-HD560. Opening the product will void the warranty. Do not attempt to service the unit. Disconnect the product and contact your authorized Atlona reseller or contact Atlona directly.
Atlona Technologies’ and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona Technologies’ decision, either return of the price paid for the product, repair, or replacement of the product that does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of the Customer’s receipt.
Atlona Product Registration Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates.
Need help?
Do you have a question about the AT-HD560 and is the answer not in the manual?
Questions and answers