Step 4: Find The Video Input Channel On Your Tv - RCA Digital Satellite Receiver User Manual

Setup and Connections
Step 4: Find the Video Input
Channel on Your TV
Note: You do not have to complete this step if you used the basic
connection.
If you used the advanced connection, you must tune your TV to the
Video Input Channel to see the screens. Since there are so many
brands and models of TVs, there are just as many ways to access a
TV's Line Input Channel. Below are some things you can try.
• If your TV brand is RCA, GE, or P
control that came with your digital satellite receiver. Then press the
WHO•INPUT button on the remote.
• If your TV brand is not RCA, GE, or P
Owner's Manual.
If you cannot find your TV Owner's Manual, you will have to investigate.
You might access the TV's Video Input Channel by:
• pressing a button on the remote control
• finding it through the TV's menu system
• tuning directly to it by pressing a specific channel number
• going through all channels in the list by pressing the channel up
or down buttons on the TV.
Below are lists of some of the different ways manufacturers label the
Video Input Channel.
Video Channel Variations
Button/switch
on the TV
VIDEO
SIGNAL
VID 1
VID 2
S-VID
S-VIDEO
S , press TV on the remote
RO CAN
S , consult your TV
RO CAN
Button on the
Channel #
TV Remote
VID 1
00
LINE
90
VID
91
VIDEO
92
S-VID
VID 1
INPUT
VID 2
S O U R C E
AUX
Signal Flow
The decision to choose a Line Input
Channel or Video Input Channel should be
made with an understanding of Signal
Flow—the way the signal flows through
your components and ends up as a
picture on your TV screen.
To learn more about how signal flow
works, see the example in the
"Troubleshooting" section.
11