Basic Connection - RCA Digital Satellite Receiver User Manual

Setup and Connections

Basic Connection

DIGITAL
SATELLITE
RECEIVER
SATELLITE IN
VCR
IN FROM ANT
CH3
CH4
OUT TO TV
TV
IN
SATELLITE
DISH
ANTENNA
IN
OUT
FROM
TO
ANT
TV
How to View Your Components
To watch satellite programming with this
connection, tune the TV to either channel 3 or 4.
(The default is channel 3.) You may change the
output channel to 4 by choosing Systems
CABLE OR
Options from the Main menu and selecting
OFF-AIR ANTENNA
Output Channel.)
To record satellite programming, tune the digital
satellite receiver to the desired channel and set
your VCR to record on channel 3 or 4.
To view VCR recordings, tune the TV to the VCR
output channel (usually channel 3 or 4) and set
your VCR to play. If your VCR is a brand other
than RCA, GE, or P
program the remote to control the VCR. See the
next section, "Using the Remote."
CAUTION
Do not stack electronic components or
other objects on top of the digital
satellite receiver. See Safety
Information, inside front cover.
S , you may need to
RO CAN
7