Home Control; Device Setup - RCA Digital Satellite Receiver User Manual

The Menu System

Home Control

Home Control lets you remotely control several lamps and devices
through your digital satellite receiver.
Home Control Setup
The Home Control Data Interface connects to the HOME CONTROL jack
on the back of the digital satellite receiver. Once connected, you must
tell the receiver to use this jack for Home Control.
1. Press OK to bring up the Main menu.
2. Point to and select Options.
3. Point to and select System Options.
4. Point to and select Data Port and choose Home Control as the
default setting.

Device Setup

1. From the Main menu select Home Control.
Home Control can control several devices.
2. Select a device you would like to control.
3. Complete the on-screen sentence using the arrow buttons and OK.
Press OK to scroll through the lists of devices and locations.
To use the Home Control feature, you
must connect one end of the Home
Control Data Interface to a remote
module attached to the device you want
to control. The other end should connect
to the HOME CONTROL jack on the back
of the digital satellite receiver via a coiled
telephone handset cord (available from
most retailers).
HOME CONTROL JACK
Home Control modules are available as
accessories and may be purchased
through your satellite dealer or the
accessories order form at the back of this
book.
61