Advanced Connection - RCA Digital Satellite Receiver User Manual

Setup and Connections

Advanced Connection

DIGITAL
SATELLITE
RECEIVER
SATELLITE IN
VCR
CH3 IN FROM ANT
CH4
OUT TO TV
TV
IN
8
SATELLITE
DISH
ANTENNA
IN
OUT
R
FROM
TO
ANT
TV
AUDIO
L
R AUDIO L VIDEO S-VIDEO
CABLE OR
OFF-AIR ANTENNA
VIDEO
S-VIDEO
How to View Your Components
To watch satellite programming in this connection,
tune the TV to the Video Input Channel. (To find
your TV's Video Input Channel, follow Step 3 on
the next page). Then tune the digital satellite
receiver to the desired channel.
To record satellite programming, tune the digital
satellite receiver to the desired channel. Then set
your VCR to record on channel 3 or 4.
To view VCR recordings, tune the TV to the VCR
Output Channel (usually channel
3 or 4—CH3 or CH4 on the back of the VCR) and
set your VCR to play. If your VCR is a brand other
than RCA, GE, or P S , you may need to
RO CAN
program the remote to control the VCR. See the
next section, "Using the Remote."
CAUTION
Do not stack electronic components or
other objects on top of the digital
satellite receiver. See Safety
Information, inside front cover.