Date Time Setting - JRC JMA-5212-4 Installation Manual

4.13

DATE TIME SETTING

To display time, the local time, local date, and time-zone difference must be set.
However, if the "ZDA" sentence of NMEA0183 is received, time can be automatically displayed.
* If "ZDA" sentence is not received, the system internal clock function is used to display the date and time.
Procedures 1. Press [RADAR MENU] key twice.
The RADAR Menu will appear.
2. Open the following windows.
8 Open the RADAR Sub Menu window.
4 Open the Data/Time Setting window.
3. Set information about date and time.
[1]
[2]
[3]
[4]
[5]
UTC/LMT (Time display system)
Press [1] to switch the time mode between:
UTC: Universal Time Coordinate
LMT: Local Time
LMT Date
Input the date in local time.
Press [2] key and call up the numeric keypad.
Input the date using the numeric keypad or the multi-dial.
Then, press [ENT] button.
LMT Time
Input the time in local time.
Input the time using the numeric keypad or the multi-dial.
Then, press [ENT] button.
Time Zone
Input the time-zone difference between the universal time and local time.
Input the time difference using the numeric keypad or the multi-dial.
Then, press [ENT] button.
Display Style
Set one of the following date display formats.
Press [5] key and select a date display format.
YYYY-MM-DD Example: 2007-12-31
MMM DD, YYYY Example: Dec 31, 2007
DD MMM, YYYY Example: 31 Dec, 2007
4-
22
4