Miele TX3587 Operating And Installation Instructions page 123

Problem
"Fault 33" appears in the
display.
"; Fault XX" appears in
the display.
The message "Function
not available" appears
in the display after
selecting Moisture
Plus d or the
"Descale" function.
The message "Moisture
control faulty - Automat-
ic programmes will
operate without
moisture" appears in the
display after selecting
an Automatic
programme.
Programmes using
moisture are not taking
in water.
Possible cause and remedy
The door lock for the Pyrolytic cleaning programme is
not being released.
^ Switch the oven off and then back on again.
If the door lock still does not release itself, call Miele.
There is a problem that you cannot resolve.
^ Call Miele.
The steam injection system is faulty.
^ Call Miele.
The steam injection system is faulty.
^ Call Miele.
Automatic programmes can be run without using
moisture.
Demo mode is active.
The oven can be used in Demo mode but the pump for
the steam injection system will not work.
^ Deactivate Demo mode (See "Settings - Showroom
programme").
Problem solving guide
123