Suresear™ Grill - KitchenAid KGCU407 Use & Care Manual

Kitchenaid appliances commercial style gas cooktop use & care guide
Table of Contents

Advertisement

Available languages

Available languages

5,000 Btu/h Simmer/Melt Burner
5. Turn on the burner. If the burner does not light, check cap
alignment. If the burner still does not light, do not service the
sealed burner yourself. Contact a trained repair specialist.
SureSear™ Grill
(on some models)
A
B
C
A. Grill grate
B. Wave tray
C. Burner assembly
The grill module consists of a cast-iron grate, a wave tray, a flame
spreader, a burner assembly, 2 grease trays and a drip tray. It is
used to grill foods. Refer to the "Grill Chart" for cook times and
settings.
When using the grill, follow the guidelines below.
Trim excess fat to reduce spattering. Slit the remaining fat on
the edges to avoid curling.
Allow space between food on the grill. Crowding food will
result in uneven cooking.
Use a metal spatula or tongs to turn food.
Steaks, chops and hamburgers should be turned only once
to avoid loss of juices.
For even cooking, foods such as chicken quarters should be
turned several times.
A
A. Incorrect
B. Correct
B
D
E
F
D. Flame spreader
E. Grease trays
F. Drip tray
To check for doneness of meats and poultry, use an instant
read thermometer or make a small cut in the center of the
food. This will avoid loss of juices.
Do not leave the grill unattended while cooking.
Do not use aluminum foil, charcoal or wood chips.
To avoid damage to cookware, do not place cookware on the
grill when in use. Food should be cooked directly on the grill
grate.
Before removing or replacing grill, make sure the control knobs
are turned to OFF. Allow the grill to cool completely before
handling.
To Remove:
1. Remove grill grate and wave tray.
2. Pull forward slightly on the flame spreader to release the tabs
from the rear slots and lift out.
A. Grill front
B. Rear tabs and slots
3. Lift up and out to remove the burner assembly.
Remove Grease Trays:
1. To remove the small grease tray, unhook tabs from slots and
lift slightly to disengage it from the large grease tray.
A
B
C
A. Large grease tray
B. Grease tray connection
C. Small grease tray
D. Slots
2. Unhook tabs from slots and lift out the large grease tray.
A
A. Large grease tray
B. Slots
B
A
D
B
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents