Error Messages; Display; Power On/Off - Marantz PM-15S1 Service Manual

2. Press DISPLAY button, the display will be the following.
3. Press DISPLAY button, the display will be the following.
4. Turn off power to quit service mode.
Service mode can be ended if turn off power from every
procedure.
The memory is cleared and the unit is initialized.
Initial settings
ID No.: 0
SIDE ILLUMINATION: ON
LEVEL TRIM: 0.0 (L/R)
ATT: -20dB
Be sure to set up manually.
MODE SW on Rear panel: STEREO
POWER ON/OFF SW: OFF

ERROR MESSAGES

Error Contents
1 ERROR 02 The units of ID No.2
overlaps.
2 ERROR 03 The unit of ID No.3
over laps.
3 ERROR 04 The unit of ID No.4
overlaps.
4 ERROR 11 The unit of ID No.2
to No.4 cannot com-
mu ni cate with the
unit of ID No.1.
5 ERROR 12 The unit of ID No.1
c a n n o t c o m m u -
ni cate with the unit
of ID No.2 to No.4
INPUT SELECTOR: CD
DISPLAY: ON
TONE: OFF
REC OUT: OFF
Measure
ID number is changed
into the ID No. not over-
lap ping.
•
If the unit ID number 1 is
not turn on, turn on the
unit ID No.1.
•
Check the remote cable
is connected correctly.
•
ID No. is changed into ID
No. not overlapping.
• Check the remote cable
is connected correctly.
4
2.

DISPLAY

3. DISPLAY
4.

POWER ON/OFF

VOLUME: -
ATT: OFF
SPEAKER : OFF
PHONO MC:OFF
1 ERROR 02 ID 2
2 ERROR 03 ID 3
3 ERROR 04 ID 4
4 ERROR 11 ID 2
ID
5 ERROR 12 ID 1
ID 2
ID
ID
• ID 1
4
1
•
• ID 1
4
ID
•