Remote Controller And Its Fuctions; Parts Name Of Remote Controller - Toshiba RAS-4M23SAV-E Service Manual

9-5. Remote Controller and Its Fuctions

9-5-1. Parts Name of Remote Controller

1
Infrared signal transmitter
Transmits signals to the indoor unit.
2
button
Push the button to start operation.
(A receiving beep is heard.)
Push the button again to stop operation.
(A receiving beep is heard.)
If no receiving sound is heard from the indoor unit,
push the button again.
3
Mode select button (MODE)
Push this button to select a mode. Each time you
push the button, the modes cycle in order from A:
Auto changeover control,
HEAT and back to A. (A receiving beep is heard.)
4
Temperature button (
... The temperature setting is raised to 30°C.
... The temperature setting is lowered to 17°C.
(A receiving beep is heard.)
5
Fan speed button (FAN)
Push this button to select the fan speed.
When you select AUTO, the fan speed is automati-
cally adjusted according to the room temperature.
You can also manually select the desired fan speed
from five available settings. (LOW
MED , MED+
(A receiving beep is heard.)
6
Auto louver button (SWING)
Push this button to swing the louver.
(A receiving beep is heard.)
Push the button again to stop the louver from
swinging. (A receiving beep is heard.)
7
Set louver button (FIX)
Push this button to adjust the air flow direction.
(A receiving beep is heard.)
8
ON timer button (ON)
Use this button to change the clock and ON timer
times.
To move up the time, push
To move down the time, push
9
OFF timer button (OFF)
Use this button to change the OFF timer times.
To move up the time, push
To move down the time, push
button.
10
Reserve button (SET)
Push this button to store the time settings.
(A receiving beep is heard.)
11
Cancel button (CLR)
Push this button to cancel the ON timer and OFF
timer. (A receiving beep is heard.)
: COOL, : DRY, :
)
TEMP
, LOW+ ,
, HIGH )
of the ON button.
ON
of the ON button.
ON
of the OFF button.
OFF
of the OFF
OFF
12
High power button (Hi POWER)
Push this button to start high power operation.
13
Memory button (MEMO)
Push this button to ready for storing the settings.
Hold down the button for 3 seconds or more to
store the setting indicated on the remote controller
and until the
14
Automatic operation button (AUTO)
Push this button to operate the air conditioner
automatically. (A receiving beep is heard.)
15
SLEEP MODE button
Push this button to start sleep mode.
16
MY COMFORT button
Push this button to operate the air conditioner
according to the settings stored using the MEMO
button.
17
PURE button (PURE)
Push this button to start the electrical air purifying
operation.
Push the button again to stop operation.
18
Off timer button (OFF)
Push this button to start the OFF timer operation.
You can select the OFF timer time from among
four settings (1, 3, 5 or 9 hours).
17
4
3
2
12
7
6
11
8
– 61 –
mark is displayed.
1
14
16
15
13
5
18
10
9