2.7 Printing in Duplex Mode
Figure 2–3 shows the paper path used during printing in duplex mode. The
duplex mode can be selected using a command from the host computer, or
by using
on the control panel.
Duplex
NOTE: Although you can select duplex mode using a command from the
host computer, you cannot select the printout delivery (faceup or duplex/
facedown) from the host; positioning the printout selector is the only way to
select the correct printout delivery.
Figure 2–3: Duplex Paper Path
MLO-005127 (Figure 2-12; 15.5 picas)
The following restrictions apply during printing in duplex mode:
•
You cannot feed envelopes.
•
You cannot feed paper manually.
Operating Information
2–11