Nautilus EV916 Owner's Manual page 33

CONSOLE CODES
There are 4 groups of console codes as follows:
Customization (codes starting with 2 or 3), Machine
Status (codes starting with 4), Diagnostic (codes
starting with 6 or 7), and Confi guration (codes
starting with 8). Each group of codes is defi ned
below. To access these console codes and the
options within each group, follow the instructions for
each section.
Customizing the EV916 and E916
You can customize several parameters on the EV9 16
and E9 16 to conform to your individual requirements,
including changing the workout default values and
setting custom parameters such as time limits,
changing screen contrast, changing language, and
changing units.
To change the workout default values:
1. Press [Level: UP], [2], [ENTER]. The console
will display "DEFAULTS".
2. Press [Level: UP] or [Level: DOWN] to scan
through the default choices. Select the option
you want to change by pressing [ENTER]. Then,
use the [Level: UP] or [Level: DOWN] keys to
view the choices for the selected option. Press
[ENTER] to accept the choice for that option.
The default options are as follows:
Change default weight
Use the numeric keypad or [Level: UP] or [Level:
DOWN] keys to change the desired default
weight for your facility. Press [ENTER] to
accept the new value.
Change default workout time
Use the numeric keypad or [Level: UP] or [Level:
DOWN] keys to change the desired default
workout time between 10 and 99 minutes.
Press [ENTER] to accept the new value.
Change default age
Use the numeric keypad or [Level: UP] or [Level:
DOWN] keys to change the desired default age
used to calculate target heart rate. Valid age
range is between 10 and 99 minutes. Press
[ENTER] to accept the new value.
Change default % Target HR
Use the numeric keypad or [Level: UP] or [Level:
DOWN] keys to change the desired target HR
value based on maximum HR. This is used to
calculate the target heart rate value based on
the % of maximum HR. Valid target HR % is
between 40 and 90%. Press [ENTER] to accept
the new value.
Change default Cool Down Time
Use the numeric keypad or [Level: UP] or [Level:
DOWN] keys to change the desired default cool
down time between 1 and 10 minutes. Press
[ENTER] to accept the new value.
To customize the console for your use:
1. Press [Level: UP], [3], [ENTER]. The console
will display "CUSTOMIZE."
2. Press [Level: UP] or [Level: DOWN] to scan
through the customize choices. Select the
option you want to change by pressing [ENTER].
Then, use the [Level: UP] or [Level: DOWN]
keys to view the choices for the selected option.
Press [ENTER] to accept the choice for
that option.
The customize options are as follows:
31