Selecting A Window Position - Assa Abloy Interlock Elevation Window Control System Installation And User Manual

SELECTING A WINDOW POSITION

After pressing any of the pre-set positions below, the Actuators will automatically move to that position.
Press Stop at any time to stop the Actuators. A symbol will be displayed next to the Zone highlighting the fact that
the window is not at a pre-set position.
Note: Maximum default chain length is 300mm. Your window might be limited to a shorter length due to restrictions.
Contact your window manufacturer if the chain length needs to be adjusted.
20
Full:
Press this button to fully open the windows in that Zone.
Vent:
Press this button to vent the windows in that Zone.
This position will open the window 15mm
Half:
Press this button to open the windows in that Zone half way.
Shut:
Press this button to shut the windows in that Zone.