Assa Abloy Interlock Elevation Window Control System Installation And User Manual page 13

RAIN SENSOR SETUP continued
Adding Rain Sensors to Zones continued:
Confirm that the message displays the correct number of Rain
Sensors online.
4. Press Yes to confirm and proceed to the next screen.
Press No or Setup to go back to the Setup screen.
Note: The system may take a few minutes to register the Rain Sensors.
Go back to the Setup page and then back into the Rain Sensor Setup page
if the incorrect number of Rain Sensors has been displayed.
IMPORTANT:
•Rain Sensors are assigned to Zones, and before Rain Sensors can
be added, Zones must be setup.
•Rain Sensors can be added to multiple Zones.
•The serial number on a Network Adaptor and the dwelling position
of the Rain Sensor it interfaces with must be noted during
installation to know which Zone(s) each Rain Sensor is to be
assigned to. Refer to page 26.
5. Use the arrow keys to match the Rain Sensor to the appropriate
Zone.
6. Press Add to Zone.
13