Attaching The Wireless Adapter To A Camcorder/Recorder; Turning On The Power - Sony CBK-WA100 Operating Instructions Manual

Attaching the Wireless
Adapter to a Camcorder/
Recorder
The wireless adapter is used by attaching it to the
camcorder/recorder and connecting the supplied DC
power cable*.
Connect the supplied USB cable and BNC cable*
according to the function that you use (page 4).
For details about attaching to the camcorder/recorder
and connecting cables, refer to the supplied "Installation
Manual."
* The DC power cable and BNC cable do not need to be
connected for the CBK-WA101.
8
Attaching the Wireless Adapter to a Camcorder/Recorder / Turning on the Power

Turning on the Power

1
Make sure that the wireless adapter is attached to
the camcorder/recorder correctly.
For details about attaching to the camcorder/
recorder, refer to the supplied "Installation
Manual."
2
Turn the wireless adapter on by setting the power
switch to "@."
The power indicator lights in light green.
The wireless adapter starts up with the same
settings from the last time it was turned off. Then,
the STATUS indicator light in light green.
Note
When connecting to the camcorder/recorder with the
USB cable, turn the wireless adapter on after the
camcorder/recorder is turned off.
About start-up settings
The wireless adapter starts up in the wireless LAN mode
according the WIRELESS switch setting.
When the WIRELESS switch is set to "AP"
The wireless adapter starts up in the AP mode (page 9).
When the WIRELESS switch is set to "ST"
The wireless adapter starts up in the STA mode
(page 10). The wireless adapter starts to connect to the
access point that the wireless adapter connects last.