System Configuration; Attaching The Adaptor To A Camcorder - Sony XDCA-55 Operating Instructions Manual

System Configuration

The following figure shows the
configuration of a system that includes the
adaptor.
Camcorder (with optional CBK-
CE01/HD02 installed in the
camera adaptor connector)
Note
Do not connect or disconnect the cables
connecting this adaptor and XDCU-50
(CCZ-A and BNC cables) while the system
is powered on. The excessive current
protection function may be activated,
cutting off power to the power circuits of
this adaptor or the XDCU-50.
If the power should be cut off, connect the
cables again in the proper fashion and wait
for a while before starting the system again.
Attaching the Adaptor to a
Camcorder
1
Screw two of the brackets supplied
with this adaptor to the battery
attachment shoe of the camcorder.
12 System Configuration
Refer to the XDCU-50 Operating Instructions for
details about how to use the adaptor when it is
connected to the XDCU-50.
This adaptor
Brackets (supplied)
2
Attach the adaptor to the battery
attachment shoe of the camcorder.
3
Tighten the attachment screws at the
top of the adaptor.
XDCU-50
a) CCZ-A cable
b) BNC cable