Audio Channel Settings; Proxy Format Settings - Sony CBK-WA100 Operating Instructions Manual

"Destination Address"
Input the address of the server for the streaming
transmission.
"Destination Port"
Input the port number that is used for streaming of
the destination server.
4
Touch "OK."
The editing is reflected and preset settings are
displayed on "Properties."
To cancel editing, touch "Cancel."
Notes
• Data may leak because the video/audio data is
transferred via Internet. Be sure that the transmission
destination can receive the streaming data. The data
may be missent to a unintended party because of
setting mistakes of the address.
• Not all frames may be played depending on the status
of the network.
• The picture quality may deteriorate in scenes with
quick motion.
• Not all frames may be played when the stream is set to
a large size with a small bit rate. To reduce this, select
a smaller size.
• When "Bit Rate" (page 24) of the proxy format setting
is set to "9Mbps (VBR)":
– "Bit Rate" of the stream setting cannot be set to a
setting higher than "6Mbps."
– When you select a preset of which "Bit Rate" is set
to a setting higher than "6Mbps," "Bit Rate" of the
streaming setting is changed to "3Mbps"
automatically.

Audio channel settings

"Audio Channel Select"
Selects the audio channel for recording.
"Ch-1 & Ch-2": Audio of the channel 1 and 2 (default
setting)
"Ch-3 & Ch-4": Audio of the channel 3 and 4
Note
The left of the item name is played on the left channel,
the right of the item name is played on the right channel.
24

Proxy Format Settings

Proxy Format Settings
You can set the format of the proxy file that is recorded
on the SD card.
Video
®
• XAVC Proxy (AVC/H.264 Main Profile, 4:2:0 Long
GOP)
• Size is selected in the following settings.
Audio
• AAC-LC compression
• Sampling frequency: 48 kHz
• Bit rate: 128 kbps for Stereo
• Playback channel is selected in the following settings.
"Size"
Set the size and bit rate of the video for the proxy file.
"1280 × 720": 9 Mbps (VBR)
"640 × 360": 3 Mbps (VBR)
"480 × 270": 1 Mbps (VBR)
"480 × 270": 0.5 Mbps (VBR)
Note
This bit rate is the average value. The actual bit rate may
be more than the average value.
"Frame Rate"
Displays the frame rate of the video. This is set by the
signal that is input from the SDI IN connector.
"23.98 fps": 23.975 fps
"25 fps": 25 fps
"29.97 fps": 29.97 fps
"50 fps": 50 fps
"59.94 fps": 59.94 fps
Note
"24 fps" is not conformed.