Preparations; Attaching The Wireless Adapter To A Camcorder/Recorder; Turning On The Power - Sony CBK-WA100 Operating Instructions Manual

Preparations

Attaching the Wireless
Adapter to a Camcorder/
Recorder
The wireless adapter is used by attaching it to the
camcorder/recorder and connecting the supplied DC
power cable.
Connect the supplied USB cable and BNC cable
according to the function that you use (page 4).
For details about attaching to the camcorder/recorder
and connecting cables, refer to the supplied "Installation
Manual."

Turning on the Power

1
Make sure that the wireless adapter is attached to
the camcorder/recorder correctly.
For details about attaching to the camcorder/
recorder, refer to the supplied "Installation
Manual."
2
Turn the wireless adapter on by setting the power
switch to "@."
The wireless adapter starts up with the settings
when you turn the wireless adapter off last, then the
power indicator and STATUS indicator light in light
green.
About start-up settings
The wireless adapter starts up in the wireless LAN mode
according the WIRELESS switch setting.
When the WIRELESS switch is set to "AP"
The wireless adapter starts up in the AP mode (page 8).
When the WIRELESS switch is set to "ST"
The wireless adapter starts up in the STA mode (page 9).
The wireless adapter starts to connect to the access point
that the wireless adapter connects last.
Attaching the Wireless Adapter to a Camcorder/Recorder / Turning on the Power
7