Product Description - R-Tech POWER MTS210D Operation Instructions Manual

Premium features include:-
• Inverter power source – more efficient to operate, provides smoother weld characteristics.
• Heavy duty wire feed unit for long working life and consistent wire feeding.
• MIG - MMA - DC Tig welding modes
• Infinite welding voltage to allow fine tuning of weld characteristics
• Adjustable arc force – controls splatter – ideal for thin materials
• Mig Operation with from 25 amps to 200 amps - ideal for very thin and thick materials
• Digital amp & volts meters
• 9 memory job stores - Easily switch between stored settings for job in hand
• Euro type torch fittings for easy torch fitment/replacement
35% Duty cycle at maximum amps @ 40
•
Recommended Processes
The R-Tech is recommended for the MIG welding processes within its output capacity of 200 Amps DC
Equipment Limitations
The R-Tech POWER MTS210D is protected from overloads beyond the output ratings and duty cycle as per
machine specifications with thermostat protection of the output coils and rectifiers.
Welding Capability Duty Cycle
The R-Tech MTS210D is rated at 200 Amps(MIG) at 35% duty cycle on a ten minute basis. If the duty cycle is
exceeded a thermal protector will shut machine off until the machine cools.
The R-Tech MTS210D is rated at 175Amps(MMA) at 35% duty cycle on a ten minute basis. If the duty cycle is
exceeded a thermal protector will shut machine off until the machine cools.
The R-Tech MTS210D is rated at 200 Amps(TIG) at 35% duty cycle on a ten minute basis. If the duty cycle is
exceeded a thermal protector will shut machine off until the machine cools.

Product Description

º
C
4